Paxton Centrifugal Air Blower

Product Details:

The new PX-series blowers offer unmatched efficiency. Compared to other high efficiency centrifugal blowers, including Paxtons own AT-series, the PX-series is 33% more efficient, with blower efficiencies as high as 80%. That means youll use 33% less energy! 

Paxton has completely redesigned the blower impellers and scrolls, improving aerodynamics to generate 33% more airflow per horsepower input.

More Power

• The PX-2000 generates as much as 1500 cfm of air flow, with its 20 hp motor. Compare this with only 1125 cfm of air flow with typical 20 hp blowers.

Less Energy

• The PX-1500 uses a 15 hp motor but generates as much air flow as standard 20 hp blower. That means youll save over $2000 in electrical costs annually thats 25% of the operating cost.  Similar savings are seen with other hp blowers.  

More Efficient

• The PX-series generates less heat, turning more energy into air power.
• Less Heat = More Air Power
• Less Heat = Longer Blower Life
• Lower Energy Use per CFM of air generated

Highly reliable

• High load capacity bearing at rated speeds for long bearing life. ABEC7 Super Precision Angular Contact bearings made in the USA.
• Stringent balancing, quality control and testing prior to leaving the factory

Standard Motors, NEMA Premium Efficiency

Product Details:

The new PX-series blowers offer unmatched efficiency. Compared to other high efficiency centrifugal blowers, including Paxton’s own AT-series, the PX-series is 33% more efficient, with blower efficiencies as high as 80%. That means you’ll use 33% less energy!

Paxton has completely redesigned the blower impellers and scrolls, improving aerodynamics to generate 33% more airflow per horsepower input.

More Power

• The PX-2000 generates as much as 1500 cfm of air flow, with its 20 hp motor. Compare this with only 1125 cfm of air flow with typical 20 hp blowers.

Less Energy

• The PX-1500 uses a 15 hp motor but generates as much air flow as standard 20 hp blower. That means you’ll save over $2000 in electrical costs annually – that’s 25% of the operating cost.  Similar savings are seen with other hp blowers.  

More Efficient

• The PX-series generates less heat, turning more energy into air power.
• Less Heat = More Air Power
• Less Heat = Longer Blower Life
• Lower Energy Use per CFM of air generated

Highly reliable

• High load capacity bearing at rated speeds for long bearing life. ABEC7 Super Precision Angular Contact bearings made in the USA.
• Stringent balancing, quality control and testing prior to leaving the factory

Standard Motors, NEMA Premium Efficiency

Product Details:

The new PX-series blowers offer unmatched efficiency. Compared to other high efficiency centrifugal blowers, including Paxton’s own AT-series, the PX-series is 33% more efficient, with blower efficiencies as high as 80%. That means you’ll use 33% less energy! 

Paxton has completely redesigned the blower impellers and scrolls, improving aerodynamics to generate 33% more airflow per horsepower input.

More Power

• The PX-2000 generates as much as 1500 cfm of air flow, with its 20 hp motor. Compare this with only 1125 cfm of air flow with typical 20 hp blowers.

Less Energy

• The PX-1500 uses a 15 hp motor but generates as much air flow as standard 20 hp blower. That means you’ll save over $2000 in electrical costs annually – that’s 25% of the operating cost.  Similar savings are seen with other hp blowers.  

More Efficient

• The PX-series generates less heat, turning more energy into air power.
• Less Heat = More Air Power
• Less Heat = Longer Blower Life
• Lower Energy Use per CFM of air generated

Highly reliable

• High load capacity bearing at rated speeds for long bearing life. ABEC7 Super Precision Angular Contact bearings made in the USA.
• Stringent balancing, quality control and testing prior to leaving the factory

Standard Motors, NEMA Premium Efficiency

Product Details:

The AT-series blowers offer highly efficient solutions for process air, drying, or vacuum applications. With availability of power ratings ranging from 7.5 hp to 20 hp, there is an AT-series blower for any industrial application.

Highly efficient for lower energy costs

• State of the art impeller design produces more airflow at lower blower speeds.
• Improved belt design to give less friction.
• Two stage filter design reduces pressure drop and vibration.

Low maintenance blowers

• Automatic belt tensioner.
• Aramid belt lasts 2x longer than polyester belts.
• Two stage filtration gives improved performance and longer life.

Low OSHA compliant noise levels

• Equipped with a silencer cartridge to reduce noise by 3 dBA.
• Sound levels can be further reduced with a blower enclosure.

Highly reliable

• High load capacity bearing at rated speeds for long bearing life. ABEC7 Super Precision Angular Contact bearings made in the USA.
• Stringent balancing, quality control and testing prior to leaving the factory.

Standard Motors, NEMA Premium Efficiency